Arduino for STM32

It's totally normal, STM32 USB device doesn't support both of those protocols, either one or other.

Finally I am able to achieve what I want with STM32CubeIDE and STM32CubeProg
https://www.st.com/en/development-tools ... beide.html
https://www.st.com/en/development-tools ... eprog.html

Far simple to use than Arduino IDE.

So what's the address, according to the source it's at 0x08000000 #define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ #define BOOTLOADER_SIZE (2 * 1024) // Bootloader size #define USER_PROGRAM (FLASH_BASE + BOOTLOADER_SIZE) // HID Bootloader takes 2 kb flash func...

Yes, the st-link upload the bootloader at 0x08000000 https://i.imgur.com/Qv0qcmG.png https://i.imgur.com/nZqVQSC.png It shouldn't be that address ? Also the arduino upload it to the correct address, just after the bootloader #define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the al...

Still not working else the sketch is actually written in the device memory after upload with Arduino, but it just mess all the board that make it unrecognizable. https://i.imgur.com/BdEvzSU.png And what do you mean by not using Serial in my sketch, why should I use serial function if I only want an ...

Yes it was I used, HID bootloader 2.0. The board is a STM32F103C8Tb. I do not use USB serial in the sketch as you can see, I just try to turn on/off a digital port. This board do accept the upload of HID bootloader, also my customized HID bootloader, but it doesn't accept my Arduino sketch. I wonder...

You have to select the corresponding bootloader in Arduino menu when uploading the sketch. Where is that option ? Else I forgot to says that it makes the board unfunctional after uploading the sketch with hid flash dfq.png Also is there a way to merge the Arduino sketch with this HID bootloader, li...

Ive downloaded this bootloader from https://github.com/Serasidis/STM32_HID_Bootloader How can I make it work with Arduino sketch ? Else this bootloader configured with serial communication does load the Arduino sketch: https://github.com/rogerclarkmelbourne/STM32duino-bootloader Here's my sketch: #d...

ag123 wrote: ↑Wed Jun 30, 2021 9:58 am one way is to install / use WSL
https://docs.microsoft.com/en-us/windows/wsl/about
you could literally have 'everything in a bundle' make, compilers etc

Thanks but I would like to do without it.

I also needed to download
http://gnuwin32.sourceforge.net/packages/coreutils.htm
https://developer.arm.com/tools-and-sof ... /downloads

Since rm and arm-none-eabi-gcc commands do not exist under windows