Arduino for STM32

Found it! I need to switch the TIM1 clock mux by: PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_TIM1; PeriphClkInit.Tim1ClockSelection = RCC_TIM1CLKSOURCE_PLL; I found that snippet while searching around. Tim1->getTimerClkFreq(); Still reports 64Mhz but the Oscope shows: 128Mhz clock. Interesti...

Understood, thanks. For anyone else searching: the WEAK void SystemClock_Config(void) lives in generic_clock.c in your variants folder. Code compiles without issues but somehow i still only get 3,9Khz clock frequency for 14 bit resolution. I would have expected (128000000/(2^14)) = 7,8Khz. Maybe the...

fpiSTM wrote: ↑Thu Feb 15, 2024 8:27 am Simply redefine the system core clock config:

Thank you very much!

Do i need to call or does it get called by the framework/core at startup?

The STM32G071GBU6N can do 128Mhz on TIM1 and TIM15. Screenshot 2024-02-15 091626.png As fas as i see it, the Arduino implementation does not support it because it needs changes in the clock path. Screenshot 2024-02-15 091727.png TIM1 (not interested in TIM15) needs to run on clock source PLLQ not th...

Hello Girls and Guys! I am currently in need to generate a high resolution high speed PWM signal. I wanted to use TIM1 in 128Mhz mode but cant figure out how to set it. (Using PlatformIO with platform:ststm32 core in Visual Code studion on windows - code runs on a STM32G071GBU6N) CubeIDE generates t...

So looks like no one knows why the oversampling isnt working?

The thermal mass is way slower than the RC lowpass with a 1,5hz -3db frequency. The temperature changes translated to resistance translated to voltage is minimal. There is no way that the temperature is changing that fast. I will implement a slower RC filter and try again. But as i tried to explain....

I already use a RC filter. I use a 1k NTC and got linearization resistors: 8,25k to ground in parallel with the NTC with a 825R from the supply to NTC. That gives me a somewhat linear temperature / voltage curve from 0-60C. The output of this got a 33n to ground to filter things a bit. So the RC fil...

I just noticed that its not the ADCs fault for having such high noise. My power supply decoupling wasnt working, i got more than 200mVpp noise on the STM32 supply.. That fix might just have eliminated the need for the software oversampling fix. However i still would want to know why this isnt working.

I am not sure if i want to do that. I already tried and its not much better. (with 4-8 samples) Sample accumulation /oversampling can do 256x with 8x shifting this gives quite some averaging for slower signals. Everything i see in the data sheet says: that should work. So i am not sure why it behave...