Still struggling with Eclipse, New issue on Page2, please help

Development environment specific, Arduino, Eclipse, VS2013,Em::Blocks etc
victor_pv
Posts: 851
Joined: Mon Apr 27, 2015 12:12 pm

Re: Still struggling with Eclipse, New issue on Page2, please help

Postby victor_pv » Fri Feb 17, 2017 4:54 pm

Nutsy wrote:
zmemw16 wrote:what is the
1. target ?
2. arduino version ?
3 os ?
4. platform ?

not understanding why there are stm32f1 and seemingly stm32f7(arm-7(??) ) flags declared ?

stephen

<EDIT> seems the ld file uses this, so can you add your ld file to the above ?
</EDIT>


Tagets baite Maple Mini stm32f103cb
Arduino 1.8.1
MacOSX Was Elcapitan now Sierra
Platform?


Are you using the latest version of the core available from Roger's github? if not, may be worth downloading and trying.
In the computer I tested with Eclipse and the code runs fine in the board, I downloaded the core about last week.

Nutsy
Posts: 165
Joined: Sun Jul 24, 2016 4:26 pm

Re: Still struggling with Eclipse, New issue on Page2, please help

Postby Nutsy » Fri Feb 17, 2017 7:41 pm

I downloaded core last week as well...

Simple proggrames build and run fine. But try adding an adressable led library... It would build broken hexes...

victor_pv
Posts: 851
Joined: Mon Apr 27, 2015 12:12 pm

Re: Still struggling with Eclipse, New issue on Page2, please help

Postby victor_pv » Fri Feb 17, 2017 9:51 pm

Nutsy wrote:I downloaded core last week as well...

Simple proggrames build and run fine. But try adding an adressable led library... It would build broken hexes...


Mine was the program to test the i2s library, which uses DMA, several interrupts and the i2s peripheral which is the same as the SPI peripheral just with different settings.

It must be something very specific.
Does you program needs any external hardware? if it doesn't read anything externally and just sends data, I can try compiling and running on mine and see what happens.

Nutsy
Posts: 165
Joined: Sun Jul 24, 2016 4:26 pm

Re: Still struggling with Eclipse, New issue on Page2, please help

Postby Nutsy » Sat Feb 18, 2017 8:43 pm

well ive only narrowed it down to the led library stuff... compiles fine from arduino ide just broken from eclipse.

it only sends streams of bits out a selected pin... no talk back from the leds.

Ive tried a simple test sketch of the library it still kills the board. Trouble is i cant do without this library or something like it as I addressable leds quite extensively.


Return to “IDE's”

Who is online

Users browsing this forum: No registered users and 2 guests