Arduino for STM32

The variant used is custom using the following : STM32F412VG While trying to use attachinterrupt on Pin PA2, output shows 4 times the number of interrupts expected ( in case of RISING, FALLING or CHANGE ) https://pasteboard.co/JX72fyr.jpg As seen in the above attached link ( also attached as custom...

Variants of STM32F412Vx with 100 pins or less dont have ports F and G according to datasheet, still GPIOF_BASE and GPIOG_BASE are defined in the stm32f412vx.h header file. Since PortNames.c only checks if GPIOF_BASE is defined that will fail since __HAL_RCC_GPIOF_CLK_ENABLE() is not defined, see &q...

Update : On removing the following code below from PortNames.c fixed the compile error. #if defined GPIOF_BASE case PortF: gpioPort = (GPIO_TypeDef *)GPIOF_BASE; __HAL_RCC_GPIOF_CLK_ENABLE(); break; #endif #if defined GPIOG_BASE case PortG: #if defined(PWR_CR2_IOSV) // Enable VDDIO2 supply for 14 I/...

Okay. This is what I added. Maybe I am missing something ? # Generic F412VE GenF4.menu.pnum.Generic_F412VE=Generic F412VE GenF4.menu.pnum.Generic_F412VE.upload.maximum_size=524288 GenF4.menu.pnum.Generic_F412VE.upload.maximum_data_size=262144 GenF4.menu.pnum.Generic_F412VE.build.board=GENERIC_F412VE...

The following STM32F412VE Arduino board is not available, hence I added the variant by copying the closest variant Generic_F412Rx and doing the necessary changes to files in it. On compiling the error I'm stuck at is : /Library/Arduino15/packages/STM32/tools/xpack-arm-none-eabi-gcc/9.2.1-1.1/bin/../...