Arduino for STM32

ok the fysetc site has this procedure to load the "firmware" via the cubeprogrammer as you mentioned- one can take a binary sketch export from arduino, and load it directly into the cube prog where does this leave this firmware from fysetc- not required? the firmware is the "bootloade...

hmm, confused, like a true noob

need to think, will get back- thx!

still no port avail on arduino.....


saw your edit
----
variant cpp patch.. looked it up
https://github.com/arduino/ArduinoCore- ... ariant.cpp

but won't this screw up the current pin out designations?

Hi ag,

ok, so if I understand correctly- get the binary from arduino and then "paste" into cubeprogrammer?
but what about the "boot file"?

still having the port issue- will try with other type ports

thx!

yep done it, got the cubeprogrammer now actually connected but now I cannot select the start address in cubeprogrammer screen- is Step 4 also- the firmware download from git is a hex file the fystect wiki talks about a bin file...... also there are now 2 different versions of the start address- but ...

thts the V2, I have the 1,2

the python... its snake oil to me....


screwing around with the cubeprogrammer, `i got a connection....

pushed the buttons according to Fystec site, still no port showing in in arduino ide

retried stm cube programmer


pressed boot button, then connected wiring then:

connection failed

yes


just saw the second part of your post- we are editing away

did get into the cubeprogrammer, but the screens worked different from the Fysetc wiki page, and got stuck in the menu, not being able to select the right drop down-grrr



Id be happy to supply/buy usuable board from you

Hi ag thx for chiming in no its not Marlin, its actually nothing to do with 3D printing, but controlling a Cartesian device Took a look at Platform IO, but somehow I can't even load "blink", while the board is recognized..... Looked at the instructables link, but very Marlin I was hoping t...

Hi all I am back- sorry :oops: got the board set up as previously mentioned, but now there are no ports shown in the arduino ide (low video, unselectable) looked for drivers, CH340 - but that turned out to be a kind of excercise in futility, non working links, (down) load errors etc checked the boar...