Arduino for STM32

I have found a own workaround for my problem. It is still very rudimentary, but it is enough for me. I use the CLI from the STM32Cubeprogrammer The below lines do the most work: For the first Arduino IDE: C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin>STM32_Programmer_CLI.exe ...

Hi, I,m using two (portable) Arduino IDE's with two STLINK V2 in exchange. One IDE with Bluepill, one with a STMF411. I use this with at one USB Hub with switchable USB channels. Each IDE has its own cache folder. This runs nearly perfect. But... If I ever forget to activate/deactivate the correct U...

mrburnette: Thank you for information! I would strongly suggest not upgrading the GCC components by over-writing files; old artifacts can reside in the file structure (different file names, flat files used for tuning and versioning, etc.) At best, overwriting leaves one with a potentially "uncl...

Dear community, after some month of pausing, I returned to programming Bluepill with official Stmduino-core. I updated to Arduino IDE 1.8.16 and Core 2.1.0 My 'old' sketch (medium complexity) now needs 56 seconds for compiling (with IDE 1.8.10 and Core 1.9 it needs only 10 sec to compile) I tested s...

There is an article in the german electronic magazine 'Elektor'

https://www.elektormagazine.de/news/gra ... er-roboter

maybe this could be interesting...


regards

kurtow

Hello, I tested the Sloeber IDE (based on Eclipse). It runs very well for me and I can compile a quite complex sketch. Also the upload to Bluepill is running. But only with the 1.7 core. When I try to use the stmduino 1.8 core, there are a lot of errors. Even a 'naked' sketch (only setup() and loop(...

Hello! I am very lucky that the stm32duino forum is alive again! In the past, I formerly only attended Rogers forum as a guest reader. I got a lot of important information from there. Thanks a lot for this to Roger. Also many Thanks to fpistm and all the other guys for their great work! My employmen...