Arduino for STM32

Simply edit this file system\SMT32F1xx\system_stm32f1xx.c and add some extra characters between the #ifndef. If it does not failed to build then this mean it is well redefine. But I have no doubt it is well redefined. So I think I need to specify the application offset in the memory region of the l...

Simply edit this file system\SMT32F1xx\system_stm32f1xx.c and add some extra characters between the #ifndef. If it does not failed to build then this mean it is well redefine. But I have no doubt it is well redefined. after patching as mentioned and making a "build_opt.h" file... I was ab...

Good answer! Thank you.

Is there a way I can verify that this define/instruction was passed correctly? Inspect the hex/bin or the output?

I am still getting an application non start.

Hi, So I have an interesting problem. I have a F103 module, which we have a custom (CAN based) bootloader, which is written in STM32CubeIDE. I would like the option of writing code using the STM32dunio core, mostly for library/peripheral testing, but also much quicker to bring code online. The jump ...

mack wrote: ↑Thu Jul 09, 2020 4:19 am It would be very good if it could use the 2nd CAN port of the stm32F105RBT.

Btw I like the way you can select Alternate pins. In my case I did use PA11,PA12

Are the STM32F105xxxx parts supported by this core?

Hey Guys, Unfortunately for me I was trying to understand how the bootloader worked and really struggled. So I thought I would write up what I have discovered. There are a few issue threads on GitHub which discuss this: https://github.com/Serasidis/STM32_HID_Bootloader/issues/29 https://github.com/S...

WARNING: library eXoCAN claims to run on STM32F1 architecture(s) and may be incompatible with your current board which runs on stm32 architecture(s). Yes I had this too, it said the example wouldn't suit my board, this is just a pretty straightforward library definition. There are a few funky thing...

Happy to confirm that this library works well on the standard core. Software Configuration: Arduino 1.8.10 STM32duino Core 1.8.0 Hardware Configuration: Generic STM32 Bluepill Ti SN65HVD232D Can Tranciever Kvaser Leaf Light v2 Single 120ohm Termination Resistor Tested Baudrates: 250K (BR250K) , 500K...