Search found 4 matches

by warner
Wed Jul 29, 2020 8:35 am
Forum: Maple & Maple mini etc
Topic: IDE does not see COM port
Replies: 2
Views: 8901

IDE does not see COM port

I folllowed the steps in https://github.com/rogerclarkmelbourne/Arduino_STM32/wiki/Installation for Windows (10) but there is no Comport other than the one on the motherboard. I did do the install_drivers.bat as superuser. In the device manager "Universal Serial Bus-controllers" there is a...
by warner
Tue Jul 28, 2020 9:42 pm
Forum: Maple & Maple mini etc
Topic: Maple mini bricked
Replies: 4
Views: 7020

Re: Maple mini bricked

I did succesfully flash the maple_mini_boot20.bin file. So I can try (tomorrow) uploading some code.
Thanks. I connected boot0 to Vcc and boot1 to GND and after power-up pressed the reset and then I had connection.
by warner
Tue Jul 28, 2020 8:58 pm
Forum: Maple & Maple mini etc
Topic: Maple mini bricked
Replies: 4
Views: 7020

Re: Maple mini bricked

I think I flashed generic_boot20_pc13.bin from https://raw.githubusercontent.com/roger ... 0_pc13.bin
by warner
Sat Jul 25, 2020 8:47 pm
Forum: Maple & Maple mini etc
Topic: Maple mini bricked
Replies: 4
Views: 7020

Maple mini bricked

I received today a Maple Mini board and wanted to do some tests with it by programming it with the Arduino IDE. So I searched Internet and found out that I had to flash another bootloader. So I installed Flash Loader Demonstrator and uploaded the bin file with a FT232. Then disconnected the FT232 an...

Go to advanced search