Search found 5 matches
- Wed Sep 09, 2020 7:59 pm
- Forum: STM32F1 based boards
- Topic: WeAct stm32f103 usb c
- Replies: 15
- Views: 29849
Re: WeAct stm32f103 usb c
Very complicated. But indeed it works this way! Thank you fpiSTM and ag123.
- Wed Sep 09, 2020 6:38 pm
- Forum: STM32F1 based boards
- Topic: WeAct stm32f103 usb c
- Replies: 15
- Views: 29849
Re: WeAct stm32f103 usb c
Setting `USB support (if available)` was set to HID
Setting `USB support (if available)` to CDC (with or without serial) makes board ACM device (ttyACM0) after `Upload`
Setting `USB support (if available)` to CDC (with or without serial) makes board ACM device (ttyACM0) after `Upload`
- Wed Sep 09, 2020 4:38 pm
- Forum: STM32F1 based boards
- Topic: WeAct stm32f103 usb c
- Replies: 15
- Views: 29849
Re: WeAct stm32f103 usb c
I set `STM32CubeProgrammer (Serial)` and uploaded compiled binary with stm32flash: it blinks now, great! The next step is HID: 1. I got pre-compiled binaries from https://github.com/Serasidis/STM32_HID_Bootloader and flashed it: % stm32flash -g 0x8000000 -b 115200 -w stm32_binaries/F103/low_and_medi...
- Fri Sep 04, 2020 7:44 am
- Forum: STM32F1 based boards
- Topic: WeAct stm32f103 usb c
- Replies: 15
- Views: 29849
Re: WeAct stm32f103 usb c
Can I start without bootloader at all? Just compile from Arduino IDE and flash with stm32flash.
I have no ST-LINK device and not going to use Cube.
I have no ST-LINK device and not going to use Cube.
- Fri Sep 04, 2020 6:03 am
- Forum: STM32F1 based boards
- Topic: WeAct stm32f103 usb c
- Replies: 15
- Views: 29849
Re: WeAct stm32f103 usb c
I bought looks like the same board from Ali. This is my first stm32 and I have a lot of questions. stm32flash says: stm32flash 0.5 http://stm32flash.sourceforge.net/ Interface serial_posix: 57600 8E1 Version : 0x22 Option 1 : 0x00 Option 2 : 0x00 Device ID : 0x0410 (STM32F10xxx Medium-density) - RAM...