Search found 1668 matches
- Wed Mar 13, 2024 2:35 pm
- Forum: General discussion
- Topic: STM32F407VGT6 programming issues
- Replies: 4
- Views: 882
Re: STM32F407VGT6 programming issues
I found this article from a google search https://community.st.com/t5/stm32-mcus-wireless/how-to-i-fix-stm32cubeprogrammer-no-stm32-target-found-after/td-p/257858 If i set the ST-LINK configuration to: Mode: Normal Reset Mode: Software Reset Then, I can successfully connect if I: Press and hold the ...
- Wed Mar 13, 2024 4:40 am
- Forum: General discussion
- Topic: STM32F407VGT6 programming issues
- Replies: 4
- Views: 882
Re: STM32F407VGT6 programming issues
one thing to try is to press and hold reset when you flash the sketch over st-link, this is called 'connect under reset'. If the tool chain is properly installed, sometimes that will override the write protection. flash a simple sketch such as to blink the led, so that you know if after all it is wo...
- Mon Mar 11, 2024 10:23 am
- Forum: General discussion
- Topic: How to port Arduino firmware into STM32 Cube IDE
- Replies: 2
- Views: 815
Re: How to port Arduino firmware into STM32 Cube IDE
For beginners, it is much easier to simply follow the getting started guide https://github.com/stm32duino/Arduino_Core_STM32/wiki/Getting-Started and to use a supported board on the STM core page. https://github.com/stm32duino/Arduino_Core_STM32 it is also suggested to get a chip that has more sram ...
- Tue Mar 05, 2024 4:03 pm
- Forum: General discussion
- Topic: Problem Uploading to STM32F405 from Arduino IDE
- Replies: 3
- Views: 759
Re: Problem Uploading to STM32F405 from Arduino IDE
jneymeyer There are some pre-requisites The first place to visit is the stm32duino wiki - which is hosted in Github instead of here. https://github.com/stm32duino/Arduino_Core_STM32/wiki Among that is the getting started guide https://github.com/stm32duino/Arduino_Core_STM32/wiki/Getting-Started Th...
- Sun Mar 03, 2024 10:18 pm
- Forum: STM32H7 based boards
- Topic: stm32h723 mini core board camera module
- Replies: 2
- Views: 1673
Re: stm32h723 mini core board camera module
if you bought it from e.g. weact
https://github.com/WeActStudio/MiniSTM32H7xx
you may need to contact them
there could be more than a few vendors, hence, it may not after all be weact, you may like to check from where you bought the board from
https://github.com/WeActStudio/MiniSTM32H7xx
you may need to contact them
there could be more than a few vendors, hence, it may not after all be weact, you may like to check from where you bought the board from
- Tue Feb 27, 2024 8:01 am
- Forum: General discussion
- Topic: [STM32F103C8T6] How can I use '128 Kbytes of Flash memory'?
- Replies: 2
- Views: 1103
Re: [STM32F103C8T6] How can I use '128 Kbytes of Flash memory'?
officially u'd need to get a stm32f103c{b,B}t6, that one has 128 k per specs, c8 is 64k per specs. So if you think you literally have 128k memory, you can try a variant for 128k e.g. maple mini. The details are actually in the ld script, check in there in the variant. Alternatively, get something li...
- Mon Feb 26, 2024 3:56 am
- Forum: General discussion
- Topic: STM32 hangs when >100khz signal applied to input
- Replies: 19
- Views: 1614
Re: STM32 hangs when >100khz signal applied to input
try something like a stm32 f4xx (e.g. stm32f401 / f411 ) board, those has the FPU, but that it is for floats only.
other things to try are to move the computation codes into loop() and only use the ISR callback to simply count cycles, e.g. increment a global variable.
other things to try are to move the computation codes into loop() and only use the ISR callback to simply count cycles, e.g. increment a global variable.
- Wed Feb 21, 2024 1:19 pm
- Forum: General discussion
- Topic: How to use PC14/PC15 as GPIO on STM32F407VGT6
- Replies: 5
- Views: 565
Re: How to use PC14/PC15 as GPIO on STM32F407VGT6
PC14 OSC32_IN PC15 OSC32_OUT is normally used for a 32 khz crystal for the RTC. it is probably not a good idea to use them as gpio ports. e.g. there is likely a 'not gate' connecting PC14 to PC15 with some extra stuff. that 'not gate' is literally used as an amplifier, given sufficient conditions e,...
- Tue Feb 20, 2024 2:00 pm
- Forum: General discussion
- Topic: Support for 32-bit Windows?
- Replies: 3
- Views: 765
Re: Support for 32-bit Windows?
The trouble with operating in 32 bits is you need a gcc-none-eabi compiler built for 32 bits. Fortunately, they are there https://developer.arm.com/downloads/-/gnu-rm and not least, you need the full suite of glibs and libs that gcc runs on, along with any libs that the rest of the tools depends on....
- Tue Feb 20, 2024 1:42 pm
- Forum: General discussion
- Topic: How to access low level registers or How to set TIM1 to 128Mhz
- Replies: 10
- Views: 2944
Re: How to access low level registers or How to set TIM1 to 128Mhz
dannyf I think the op kind of mentions that stm32g071 timers can do 128 Mhz. it is something quite interesting to explore, that is practically VHF, FM radio frequencies if you noted. in a sense if that is possible, even for that matter use it as an oscillator, mix it with FM radio waves from an ant...