Examples

Development environment specific, Arduino, Eclipse, VS2013, Em::Blocks etc
mrburnette
Posts: 352
Joined: Thu Dec 19, 2019 1:23 am
Answers: 1

Re: Examples

Post by mrburnette »

... to me, looks like the 2 PC's have differences ... I would expect that.

I have 3 machines here that the IDE menus look different (different IDE versions) and different core versions installed over time.

Remember, the IDE looks across the user storage space and builds Examples, Boards, and sub-menus dynamically.

READ this:
https://www.arduino.cc/en/guide/environment

and then note:
Last revision 2015/09/07 by SM
Documentation can take a long time to be updated... a very long time.
GonzoG
Posts: 88
Joined: Wed Jan 15, 2020 11:30 am
Answers: 5

Re: Examples

Post by GonzoG »

stan wrote:
Mon Jan 25, 2021 8:54 pm
I followed the links and the results are as in previous post.
Screen Shot 2021-01-25 at 3.34.37 PM.png
This what is missed and I can't fix that.
I've just installed Roger's Clark core and it works. It's just download, unzip, change folder name, move.
Attachments
stm_roger1.png
stm_roger1.png (57.11 KiB) Viewed 644 times
stan
Posts: 70
Joined: Wed Nov 11, 2020 7:40 pm

Re: Examples

Post by stan »

Screen Shot 2021-01-25 at 8.50.57 PM.png
Screen Shot 2021-01-25 at 8.50.57 PM.png (81.28 KiB) Viewed 640 times
I did 3 things = marked.

You
It's just download, unzip, change folder name, move.
1. It's just download,
2. unzip,
3. change folder name, move.
Me
1. It's just download,
2. unzip to desktop, copy folder
3. paste to arduino hardware

No change folder name
move = paste to arduino hardware ?
mrburnette
Posts: 352
Joined: Thu Dec 19, 2019 1:23 am
Answers: 1

Re: Examples

Post by mrburnette »

Did you close and re-open the Arduino IDE?
GonzoG
Posts: 88
Joined: Wed Jan 15, 2020 11:30 am
Answers: 5

Re: Examples

Post by GonzoG »

stan wrote:
Tue Jan 26, 2021 2:01 am
Screen Shot 2021-01-25 at 8.50.57 PM.png

I did 3 things = marked.

You
It's just download, unzip, change folder name, move.
1. It's just download,
2. unzip,
3. change folder name, move.
Me
1. It's just download,
2. unzip to desktop, copy folder
3. paste to arduino hardware

No change folder name
move = paste to arduino hardware ?
As you can see, there's clearly stated that you need "Arduino_STM32" folder, not "Arduino_STM32-master" which you will get after unzip.
stan
Posts: 70
Joined: Wed Nov 11, 2020 7:40 pm

Re: Examples

Post by stan »

I changed the name and list is Long = Thanks for hint.

board ok.png
board ok.png (23.88 KiB) Viewed 592 times
example list does not changed
Post Reply

Return to “IDE's”