ST-Link and Blue Pill

Post Reply
carloca
Posts: 6
Joined: Tue Mar 17, 2020 8:38 pm
Answers: 1

ST-Link and Blue Pill

Post by carloca »

Hi,
Is it possible to download code with ST-Link within Arduino IDE to a blue pill board?
I don't see the right "upload method"
Thanks
.rpv
Posts: 43
Joined: Wed Dec 18, 2019 10:19 pm

Re: ST-Link and Blue Pill

Post by .rpv »

Hi, the stlink option it's still there, now it's called "STM32CubeProgrammer SWD" on arduino ide, but you have to download some kind of software with the same name on the ST site.
carloca
Posts: 6
Joined: Tue Mar 17, 2020 8:38 pm
Answers: 1

[solved] Re: ST-Link and Blue Pill

Post by carloca »

Thanks a lot
I already have STM32CubeProg installed..
razvitm
Posts: 38
Joined: Sat Apr 11, 2020 12:35 pm

Re: ST-Link and Blue Pill

Post by razvitm »

I had the same problem, just install stm32cubeprogrammer and use the STM32CubeProgrammer(SWD) uploading option to use ST-Link programmer.
jonghaboy
Posts: 9
Joined: Fri Mar 13, 2020 7:08 am

Re: ST-Link and Blue Pill

Post by jonghaboy »

https://youtu.be/zUk0lN1oEwQ?t=382

try following this guy
Post Reply

Return to “STM32F1 based boards”