Arduino for STM32

Posted: **Tue Mar 17, 2020 6:18 pm**

Hello friends,

I'm trying to use the Arduino IDE to portabilize a program made for Arduino Uno in a program for STM32L476RG Nucleo-64.
The steps I have already followed are as follows:
1) I installed the USB driver for the ST cards: STSW-LINK009;
2) I indicated the Json address in the Arduino IDE: File -> Preferences -> Settings -> Additional Boards Manager URLs -> https://github.com/stm32duino/BoardMana ... index.json
3) In the Boards Manager, I installed the STM32 Cores by STMicroeletronics version 1.8.0
When I try to add the STM32L476RG board, however, it does not appear in the listing.
What am I doing wrong?

Thanks for listening!
Fabio

Posted: **Tue Mar 17, 2020 7:31 pm**

If you get a nucleo L476RG then select Nucleo64 and after the nucleo l476RG in the submenu board part number.

Posted: **Wed Mar 18, 2020 1:25 pm**

Thank you very much for your help! I'm starting on STM32, I didn't notice the sub-menu for choosing the board version ...

Posted: **Wed Mar 18, 2020 1:42 pm**

Welcome.
That's why there is a getting started wiki

https://github.com/stm32duino/wiki/wiki/Getting-Started

Posted: **Sat Mar 21, 2020 4:13 pm**

Perfect!

Arduino for STM32

[Answered] Difficulties in configuring the STM32L476RG board in the Arduino IDE.

[Answered] Difficulties in configuring the STM32L476RG board in the Arduino IDE.

Re: Difficulties in configuring the STM32L476RG board in the Arduino IDE.

Re: Difficulties in configuring the STM32L476RG board in the Arduino IDE.

Re: [Answered] Difficulties in configuring the STM32L476RG board in the Arduino IDE.

Re: [Answered] Difficulties in configuring the STM32L476RG board in the Arduino IDE.