STM32F103 Ethernet library?

Working libraries, libraries being ported and related hardware
Post Reply
indridkold
Posts: 3
Joined: Mon Jan 06, 2020 8:26 pm

STM32F103 Ethernet library?

Post by indridkold »

I'm in the initial stages of selecting a processor for a wired ethernet project. I'll be using the STM32 Core. My supported choices so far are the F767 + external PHY, or the F103 + Wiznet5500. For the F767 the official STM32Ethernet library is clearly the one to use, but what is recommended for use with the F103 + Wiznet? I'm sure the Official Arduino Ethernet library would work after some modifications, as would the official library from Wiznet. Any recommendations would be appreciated, thanks.

User avatar
fpiSTM
Posts: 787
Joined: Wed Dec 11, 2019 7:11 pm
Answers: 30
Location: Le Mans
Contact:

Re: STM32F103 Ethernet library?

Post by fpiSTM »

I did no try with the wiznet. Did you try the Ethernet library?
Or you can test this one:
https://github.com/UIPEthernet/UIPEthernet

khoih-prog
Posts: 54
Joined: Thu Feb 27, 2020 7:54 am

Re: STM32F103 Ethernet library?

Post by khoih-prog »

You can have a look at

EthernetWebServer for STM32

The best and easiest way is to use F767ZI with built-in Ethernet PHY, which is supported by the above-mentioned library, via official STM32Ethernet library.

It also supports :

1. STM32 boards (with 64+K Flash) running ENC28J60 Ethernet shields via UIPEthernet library
2. STM32 boards (with 64+K Flash) running Wiznet W5x00 Ethernet shields via Ethernet library

User avatar
Juraj
Posts: 28
Joined: Fri Jan 03, 2020 7:47 pm
Answers: 1
Location: Slovakia
Contact:

Re: STM32F103 Ethernet library?

Post by Juraj »

indridkold wrote:
Mon Jan 13, 2020 7:01 pm
I'm in the initial stages of selecting a processor for a wired ethernet project. I'll be using the STM32 Core. My supported choices so far are the F767 + external PHY, or the F103 + Wiznet5500. For the F767 the official STM32Ethernet library is clearly the one to use, but what is recommended for use with the F103 + Wiznet? I'm sure the Official Arduino Ethernet library would work after some modifications, as would the official library from Wiznet. Any recommendations would be appreciated, thanks.
for F103 + Wiznet use the official Arduino Ethernet library from the Library Manager

(UIPEthernet is for enc28j60 chips)

nopnop2002
Posts: 2
Joined: Sun Jun 21, 2020 7:47 am

Re: STM32F103 Ethernet library?

Post by nopnop2002 »

STM32 Core and STM32F103 can use these Ethernet libraries.

- ENC28J60
https://github.com/UIPEthernet/UIPEthernet

Chip select is specified using Ethernet.init().

- W5x00
https://github.com/nopnop2002/Arduino-STM32-Ethernet

Post Reply

Return to “Libraries & Hardware”