Any support/use for STM8?

Post here first, or if you can't find a relevant section!
Post Reply
neo_nmik
Posts: 20
Joined: Thu Feb 04, 2021 7:09 pm
Answers: 2

Any support/use for STM8?

Post by neo_nmik »

So, I was happy this morning as my long awaited AliExpress order turned up...

Turned out, the seller sent 10x STM8S105 black boards, instead of 10x Blue Pills (STM32F103). :oops:

Super annoying, definitely my fault for ordering too cheap (I got excited as they were the oldish price of £1.80~ a board).

Anyyyy way, as I wait for my STM32F401 (I ordered from a place I've ordered from before and at just over £3ea with shipping and they were cheaper than any F103's I could find on AliExpress) does anybody want/know of anything to do with these? As far as I can tell, they're a large Nano with less memory. :|

Nick
stevestrong
Posts: 502
Joined: Fri Dec 27, 2019 4:53 pm
Answers: 8
Location: Munich, Germany
Contact:

Re: Any support/use for STM8?

Post by stevestrong »

There is a section dedicated for STM8: viewforum.php?f=75
With F401 you can do same (and more) as you want with F103.
neo_nmik
Posts: 20
Joined: Thu Feb 04, 2021 7:09 pm
Answers: 2

Re: Any support/use for STM8?

Post by neo_nmik »

stevestrong wrote: Sat May 01, 2021 9:46 pm There is a section dedicated for STM8: viewforum.php?f=75
With F401 you can do same (and more) as you want with F103.
Thanks Steve! I’ll have a play with them and post any stuff there.

As for the F401’s they’re probably more suited to my project to be honest! (Mainly the I2s). The pin out is a little different, but I haven’t made my boards yet, so it’ll be fine!
dannyf
Posts: 447
Joined: Sat Jul 04, 2020 7:46 pm

Re: Any support/use for STM8?

Post by dannyf »

The stm8 are nice chip, so long as you don't do much math. I love them myself. Get a copy of iar and you are set.
dannyf
Posts: 447
Joined: Sat Jul 04, 2020 7:46 pm

Re: Any support/use for STM8?

Post by dannyf »

Would resist running Arduino on them. Much easier to code to the data sheet.
Post Reply

Return to “General discussion”