Arduino IDE with MikroE M4 Clicker Board - Board Manager

Post here first, or if you can't find a relevant section!
WanaGo
Posts: 7
Joined: Fri May 28, 2021 7:26 am

Re: Arduino IDE with MikroE M4 Clicker Board - Board Manager

Post by WanaGo »

Managed to get it working.
Not exactly sure what was stopping it working, but building in the Arduino IDE and then putting the HEX it generates into the MikroE loader, which flashes it over the USB port - is working. Not elegant by any means but its working.
The Arduino IDE flashing doesn't erase the bootloader loaded, so all good there. Would be nice to somehow get the Arduino IDE to use it though.

This is the bootloader and the loader is in there too.
https://download.mikroe.com/examples/st ... d-v100.zip
Post Reply

Return to “General discussion”