Hi,
I have a STM32VLDISCOVERY board and I want to use it as Arduino.
https://www.st.com/ja/evaluation-tools/ ... overy.html
This board seems to have supported Arduino for STM32, but I can't connect it via onboard USB.
I think I need proper bootloader for it.
Could you tell me how to find (or porting ?) bootloader for STM32VLDISCOVERY ?
I could upload Arduino .ino.bin file to STM32VLDISCOVERY via ST-Link but I want to deploy directly via Arduino IDE.
USB connection to STM32VLDISCOVERY
Re: USB connection to STM32VLDISCOVERY
The F100 has no buitlin bootloader supporting DFU, so yes you should use a dedicated bootloader for this.
But AFAIK, there is no one supporting it.
You can try to build one using Roger's bootloder repo
https://github.com/rogerclarkmelbourne/ ... bootloader
or HID one from vassilis:
https://github.com/Serasidis/STM32_HID_Bootloader
But AFAIK, there is no one supporting it.
You can try to build one using Roger's bootloder repo
https://github.com/rogerclarkmelbourne/ ... bootloader
or HID one from vassilis:
https://github.com/Serasidis/STM32_HID_Bootloader
Re: USB connection to STM32VLDISCOVERY
Does the VLDISCO (F100) support USB at all ?
The USB plug on the board is for the onboard ST-Link-V1 debugger
/Bingo
The USB plug on the board is for the onboard ST-Link-V1 debugger
/Bingo