ST-Link V2 on macOS Monterey with M1 Chip

Post here first, or if you can't find a relevant section!
Post Reply
tsingtao
Posts: 1
Joined: Fri Jul 15, 2022 2:20 pm

ST-Link V2 on macOS Monterey with M1 Chip

Post by tsingtao »

Hi everybody,
does anybody know how to operate the ST-Link V2 on macOS Monterey with M1 Chip?
I'm using the Arduino IDE 1.8.19 and have installed the Sduino STM8 plain C core.
All is fine, I can choose the correct board and the programmer.
I can successful compile the sketch but no upload to the device, a common STM8SF103F3P6, is possible.
I just get the info, that no programmer is installed.
Thanks for your support!
Rainer
doubleaswi
Posts: 9
Joined: Mon Aug 22, 2022 7:42 am

Re: ST-Link V2 on macOS Monterey with M1 Chip

Post by doubleaswi »

Thank you for the information I was about to write!



__________________________________
https://www.medipakiet.pl/blog/e-recept ... a-recepta/
Post Reply

Return to “General discussion”