im confused as newbie with this dev card... i bought this wio-e5-mini board, containing STM32WLE5JC. If i use stm32duino/Arduino_Core_STM32 library and select the correct board...and then "upload" any example code..i guess according to "1. Factory AT Firmare" at https://wiki.seeedstudio.com/LoRa_E5_mini/#features
that will wipe the AT commands and the AT firmware is not avaible.... its fine for me if i still can transmit, recive and connect to ttl/lorawan network. But i cannot found or understand if theres a library(or example code) that work with this STM32WLE5JC.
for the moment i use arduino micro to read a analog tempsensor and then publish the result via AT commands to wio-e5-mini, and the dev-board sends data to a ttl/lorawan, it works great. Im trying to understand if i can do the same using the chip on the wio-e5-mini board, the board got pinouts but the seeedstudios manual does not tell how to read / write these pinouts... I cant even find in the AT command manual if theres a way to ask wio-e5-mini board the state of a pin... ..
is seeedstudios Wio-E5 mini, lorawan compatible using sm32duino?
Post here first, or if you can't find a relevant section!
Return to “General discussion”
Jump to
- Announcements
- New users start here
- ↳ Forum rules, FAQs and HowTo's
- ↳ Let us know a bit about you and your projects
- Arduino for STM32
- ↳ General discussion
- ↳ Ideas & suggestions
- ↳ Cores
- ↳ STM32 Core
- ↳ Builds and Announcements
- ↳ Code snippets
- ↳ Ideas & suggestions
- ↳ General discussion
- ↳ Installation and OS related
- ↳ Libraries & Hardware
- ↳ PR's bugs and enhancements
- ↳ LibMaple
- ↳ Builds and Announcements
- ↳ Code snippets
- ↳ General discussion
- ↳ Ideas & suggestions
- ↳ Installation and OS related
- ↳ Libraries & Hardware
- ↳ PR's bugs and enhancements
- ↳ Steve's LibMaple core
- ↳ General discussion
- ↳ PR's bugs and enhancements
- ↳ Projects
- ↳ IDE's
- ↳ Off topic
- Arduino for STM8
- ↳ General discussion
- ↳ Cores
- ↳ STM8 Core
- ↳ Other
- Boards
- ↳ Custom design boards
- ↳ Maple & Maple mini etc
- ↳ STM boards (Discovery, Eval, Nucleo, ...)
- ↳ All other boards
- ↳ STM32F0 based boards
- ↳ STM32F1 based boards
- ↳ STM32F2 based boards
- ↳ STM32F3 based boards
- ↳ STM32F4 based boards
- ↳ STM32F7 based boards
- ↳ STM32G0 based boards
- ↳ STM32G4 based boards
- ↳ STM32H7 based boards
- ↳ STM32L0 based boards
- ↳ STM32L1 based boards
- ↳ STM32L4 based boards
- ↳ STM32L5 based boards
- ↳ STM32MP1 based boards
- ↳ STM32WB based boards
- Bootloaders
- ↳ STM32 HID bootloader
- ↳ USB bootloader
- ↳ STM32 SD-Bootloader
- ↳ STM32 USB CDC bootloader
- Uploaders and debuggers
- ↳ STLink
- ↳ USB to Serial adaptors
- ↳ Black Magic Probe & other
- Dead Thread Graveyard
- ↳ Dead Thread Graveyard