I'm trying to load the blink sketch on one of my first STM32 board that I designed. (It's the STM32F103C8T6)
It is detected by my Mac when I plug it, but then, when I simply try to load the Blink sketch, it outputs me this error :
Could someone help me ?dfu-util: Invalid DFU suffix signature
dfu-util 0.8
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2014 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
Opening DFU capable USB device...
ID 1eaf:0003
Run-time device DFU version 0110
Claiming USB DFU Interface...
Setting Alternate Setting #2 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 0110
Device returned transfer size 1024
dfu-util: Invalid dfuse address: /Applications/Arduino.app/Contents/Java
Une erreur est survenue lors du transfert du croquis
Thanks
PS : I'm French btw so it's normal if you see the output with text in French.