I would like to use the Arduino IDE with the DE10-Nano Development Kit

Development environment specific, Arduino, Eclipse, VS2013, Em::Blocks etc
Post Reply
ratchapol
Posts: 4
Joined: Mon May 11, 2020 7:34 am

I would like to use the Arduino IDE with the DE10-Nano Development Kit

Post by ratchapol »

I would like to use the Arduino IDE with the DE10-Nano Development Kit.
Could you suggest me?
stas2z
Posts: 131
Joined: Mon Feb 24, 2020 8:17 pm
Answers: 8

Re: I would like to use the Arduino IDE with the DE10-Nano Development Kit

Post by stas2z »

it's not stm32 based, so this board is not a proper place to ask about it
mrburnette
Posts: 633
Joined: Thu Dec 19, 2019 1:23 am
Answers: 7

Re: I would like to use the Arduino IDE with the DE10-Nano Development Kit

Post by mrburnette »

ratchapol wrote: Fri May 15, 2020 7:16 am I would like to use the Arduino IDE with the DE10-Nano Development Kit.
Could you suggest me?
While this forum is unable to provide support, your DE10-Nano already has some limited Arduino support:
https://rocketboards.org/foswiki/Docume ... pmentBoard

Good luck,

Ray
ratchapol
Posts: 4
Joined: Mon May 11, 2020 7:34 am

Re: I would like to use the Arduino IDE with the DE10-Nano Development Kit

Post by ratchapol »

Thank you very much
Post Reply

Return to “IDE's”