STM3210C-EVAL
-
- Posts: 3
- Joined: Mon Jan 06, 2020 8:26 pm
STM3210C-EVAL
Any chance/plan of support for the STM3210C-EVAL board using the STM32F107VCT MCU? Would be great to have integrated ethernet in a smaller form factor. The other connectivity solutions are all 144 pin. Thanks for any assistance.
Re: STM3210C-EVAL
Hi indridkold
You can add your own variant to the STM32 core following this wiki:
https://github.com/stm32duino/wiki/wiki ... nt-(board)
It already support the MCU F107.
You can add your own variant to the STM32 core following this wiki:
https://github.com/stm32duino/wiki/wiki ... nt-(board)
It already support the MCU F107.
-
- Posts: 3
- Joined: Mon Jan 06, 2020 8:26 pm
Re: STM3210C-EVAL
Thanks for your response. I hadn't seen the instructions regarding adding a new board, that's great, I'll pursue that.
When you say the F107 is already supported do you mean there's already a board in the STM32 list? The only one I could find under EVAL is the SensorTile.
Thanks again,
IK
When you say the F107 is already supported do you mean there's already a board in the STM32 list? The only one I could find under EVAL is the SensorTile.
Thanks again,
IK
Re: STM3210C-EVAL
Baords and MCUs are differents.
I means that ther MCU is known by the core.
I means that ther MCU is known by the core.