FlashStorage_STM32F1 Library
How To Install Using Arduino Library Manager
Why do we need this FlashStorage_STM32F1 Library
Features
The FlashStorage_STM32F1 library, inspired from Cristian Maglie's FlashStorage, provides a convenient way to store and retrieve user's data using emulated-EEPROM, from the non-volatile flash memory of STM32F1/F3, including non-genuine CH32F103xx, CS32F103xx, etc. boards with 32KB, 64KB and 128KB Flash.
The flash memory, generally used to store the firmware code, can also be used to store / retrieve more user's data and faster than from EEPROM. Thanks to the buffered data writing and reading, the flash access time is greatly reduced to increase the life of the flash.
Currently, the library supports both new STM32 core v2.0.0 and previous STM32 core v1.9.0
Currently supported Boards
1. STM32F1/F3 boards with / without integrated EEPROM
Changelog
Releases v1.0.1
1. Fix mistake in initial releases
Releases v1.0.0
1. Initial release to support STM32F1/F3 boards with / without integrated EEPROM
2. Tested using genuine STM32F103, or CH32F103/CS32F103 boards with 32KB, 64KB or 128KB Flash Size
3. Configurable Flash Sector to use
4. FlashStorage size is 1024 bytes (including 1-byte valid and 4-byte signature)
FlashStorage_STM32F1 Library
Working libraries, libraries being ported and related hardware
-
- Posts: 102
- Joined: Thu Feb 27, 2020 7:54 am
- Location: Toronto
Return to “Libraries & Hardware”
Jump to
- Announcements
- New users start here
- ↳ Forum rules, FAQs and HowTo's
- ↳ Let us know a bit about you and your projects
- Arduino for STM32
- ↳ General discussion
- ↳ Ideas & suggestions
- ↳ Cores
- ↳ STM32 Core
- ↳ Builds and Announcements
- ↳ Code snippets
- ↳ Ideas & suggestions
- ↳ General discussion
- ↳ Installation and OS related
- ↳ Libraries & Hardware
- ↳ PR's bugs and enhancements
- ↳ LibMaple
- ↳ Builds and Announcements
- ↳ Code snippets
- ↳ General discussion
- ↳ Ideas & suggestions
- ↳ Installation and OS related
- ↳ Libraries & Hardware
- ↳ PR's bugs and enhancements
- ↳ Steve's LibMaple core
- ↳ General discussion
- ↳ PR's bugs and enhancements
- ↳ Projects
- ↳ IDE's
- ↳ Off topic
- Arduino for STM8
- ↳ General discussion
- ↳ Cores
- ↳ STM8 Core
- ↳ Other
- Boards
- ↳ Custom design boards
- ↳ Maple & Maple mini etc
- ↳ STM boards (Discovery, Eval, Nucleo, ...)
- ↳ All other boards
- ↳ STM32F0 based boards
- ↳ STM32F1 based boards
- ↳ STM32F2 based boards
- ↳ STM32F3 based boards
- ↳ STM32F4 based boards
- ↳ STM32F7 based boards
- ↳ STM32G0 based boards
- ↳ STM32G4 based boards
- ↳ STM32H7 based boards
- ↳ STM32L0 based boards
- ↳ STM32L1 based boards
- ↳ STM32L4 based boards
- ↳ STM32L5 based boards
- ↳ STM32MP1 based boards
- ↳ STM32WB based boards
- Bootloaders
- ↳ STM32 HID bootloader
- ↳ USB bootloader
- ↳ STM32 SD-Bootloader
- ↳ STM32 USB CDC bootloader
- Uploaders and debuggers
- ↳ STLink
- ↳ USB to Serial adaptors
- ↳ Black Magic Probe & other
- Dead Thread Graveyard
- ↳ Dead Thread Graveyard