STEVAL-MKSBOX1V1 - SensorTile.box

All about boards manufactured by ST
Post Reply
zoomx
Posts: 28
Joined: Fri Dec 20, 2019 10:12 am
Location: Near Mt.Etna

STEVAL-MKSBOX1V1 - SensorTile.box

Post by zoomx »

A friend of mine borrowed me an STEVAL-MKSBOX1V1 - SensorTile.box
https://www.st.com/en/evaluation-tools/ ... ox1v1.html

I started playing with the associated app for Android (but there is the iOS also).

Looking forward to write more complex application I foud that is supported in the ST core.
But I found also that if i want to use BLE I have to reflash the BLE chip. To flash chip I have to solder a SWD 0.05" pitch 10pin male connector in the apposite space of the PCB.

So at this moment I am playing only with the app.
fpiSTM
Posts: 1833
Joined: Wed Dec 11, 2019 7:11 pm
Answers: 102
Location: Le Mans
Contact:

Re: STEVAL-MKSBOX1V1 - SensorTile.box

Post by fpiSTM »

Right.
The default firmware does not support LL only mode...
zoomx
Posts: 28
Joined: Fri Dec 20, 2019 10:12 am
Location: Near Mt.Etna

Re: STEVAL-MKSBOX1V1 - SensorTile.box

Post by zoomx »

I noticed today that in the main page of STM32duino on github
https://github.com/stm32duino/Arduino_Core_STM32
that the note near the STEVAL-3DP001V1 regarding the BLE firmware that should be updated is disappeared!

There is no need anymore to update that firmware?
fpiSTM
Posts: 1833
Joined: Wed Dec 11, 2019 7:11 pm
Answers: 102
Location: Le Mans
Contact:

Re: STEVAL-MKSBOX1V1 - SensorTile.box

Post by fpiSTM »

Well don't remember a specific note.
Only this:https://github.com/stm32duino/wiki/wiki/stm32duinoble

And as far as I know it is always true.
Post Reply

Return to “STM boards (Discovery, Eval, Nucleo, ...)”