Is the reset pin needed when debugging BluePill with STLink v2 clone?

Post here first, or if you can't find a relevant section!
Post Reply
Piter_de_Vries
Posts: 14
Joined: Sat Sep 17, 2022 4:12 pm

Is the reset pin needed when debugging BluePill with STLink v2 clone?

Post by Piter_de_Vries »

For in-circuit debugging on a BluePill board with an STLink v2 clone dongle, does the reset wire need to be connected or is that exclusively for programming the STM8?
Post Reply

Return to “General discussion”