Arduino for STM32

Thanks ozcar,
work has got in the way of this little project.
Eventually I want to get the CAN working because that's what makes this little thing great for cars.

I am still on a learning curve with the STM32 so I will probably try Adafruits neopixel, the other functions on this job are really ...

fantastic Frederic , thanks for that,

I will have a look at making a Custom board based on a core and using a generic F0

and hopefully post some useful info for those following in my footsteps.


Mike

that is correct,
it is in the install instructions for the STG
I got it by adding this
“https://raw.githubusercontent.com/jasysdotde/STG-8xx/master/JSON/package_barth_index.json
then
Tools → Board: … → Boards Manager… and set type to “Contributed”. Select “BARTH MiniPLC by BARTH elektronik”

so ...

So it gets stranger...
when I first go into board manager.. I see the BARTH STG mini PLC controller listed.
http://www.beady.com/images/Forums/BARTH3.jpg

the moment I click the box the screen changes to this

http://www.beady.com/images/Forums/BARTH4.jpg

I tried to remove the STM32 cores. but ...

Thanks for that,
somehow I didn't spot that thread
from that post, I revisited the Adafruit Neopixel library to try and get it to work.
I get the error ...
LL_GPIO_ResetOutputPin' was not declared in this scope and a few more relating to the GPIO pin settings.

In trying to fix those errors ...

Hi
new on here and can't find any info on this.
The BARTH documentation recommends this forum so here goes …

The newer BARTH PLC uses an STM32 if you haven't looked at them for real world applications its worth a look they work up to 7-32V + CAN
https://uk.rs-online.com/web/p/logic-modules ...